• Turn off tap before starting.
• Remove shower head by unscrewing from the water outlet.
• Apply plumbing tape (3-4 turns) to water outlet to prevent leaks.
• Attach filter to the water outlet by twisting clockwise until the filter is firmly attached.
• Apply plumbing tape (3-4 turns) to the shower filter's outlet to prevent leaks.
• Attach shower head (fixed or handheld) by twisting clockwise until firmly attached.
• AFter installation check for leaks and tighten if necessary.
• Run shower for 2-3 minutes to rinse before first use.

Compatible Accessories & Refills

Support your setup with these must-haves for optimal shower performance.