how to clean hydrogen water bottle

How To Clean Your Hydrogen Water Bottle: A Simple Guide

Hydrogen water bottles don't require frequent cleaning, as they typically only store water. However, when cleaning is necessary, there are a few important steps to follow.

For the body and lid, you can clean them using any method you prefer—just apply basic common sense to ensure they remain hygienic.

The electrolyser base, however, requires more specific care. To clean the electrolyser base, follow these steps:

  1. Mix 1:1 white vinegar and water.
  2. Pour the mixture into the hydrogen water bottle.
  3. Run the bottle on its maximum cycle (10 minutes).
  4. Once the cycle is complete, empty the bottle and rinse it with cold or lukewarm tap water.
  5. Run one more cycle with plain water to ensure everything is fully cleaned.

This process helps descale and remove impurities that may build up on the electrolyser, especially when using unfiltered or impure water. For better maintenance, using filtered water instead of tap water can reduce the need for frequent cleaning.

Key Takeaways

  • Hydrogen water bottles don’t need frequent cleaning but should be cleaned when necessary.
  • The electrolyser base requires specific care to prevent mineral buildup and maintain optimal performance.
  • Use a vinegar-water solution to descale the electrolyser and keep it functioning properly.
  • Cleaning the body and lid with mild dish soap is sufficient, but ensure a thorough rinse to avoid residue.
  • Using filtered water can reduce mineral buildup and the need for frequent cleaning.

 

The Importance of Cleaning Your Hydrogen Water Bottle

Regular cleaning of your hydrogen water bottle is essential to ensure its longevity and effectiveness. While these bottles primarily hold water, and you might not think they require frequent maintenance, there are several important reasons why routine cleaning—especially of the electrolyser base—is crucial.

importance of cleaning hydrogen water bottle

1. Prevent Mineral Buildup

One of the main reasons for cleaning your hydrogen water bottle is to prevent mineral buildup. If you’re using tap water, minerals and impurities can accumulate inside the bottle, particularly in the electrolyser base where hydrogen is generated. Over time, this buildup can affect the bottle’s performance, leading to reduced hydrogen production and less effective infusion into your water. Regular cleaning ensures your bottle continues to generate the maximum levels of molecular hydrogen.

2. Ensure Fresh and Pure Water

Cleaning also guarantees that your water remains fresh and pure. Although the bottle only holds water, lingering impurities or residue can alter its taste and quality. If you use your hydrogen water bottle daily, keeping the electrolyser clean ensures the water you drink is not only safe but also optimally hydrogen-infused for health benefits.

3. Prolong the Bottle's Lifespan

Proper cleaning can significantly prolong the lifespan of your hydrogen water bottle. By removing impurities and descaling the electrolyser, you help protect its internal components from wear and tear. This means your bottle will keep delivering hydrogen-rich water for much longer, reducing the risk of malfunctions or the need for replacements.

4. Maximise Health Benefits

Ultimately, maintaining a clean hydrogen water bottle is about more than hygiene—it’s about ensuring you get the maximum health benefits from your water. Hydrogen-infused water is known for its antioxidant properties, and regular cleaning ensures you consistently receive these benefits. A simple cleaning routine, such as running a vinegar-water cycle periodically, will keep your bottle functioning at its best.

How to Clean Hydrogen Water Bottle

clean hydrogen water bottles

While hydrogen water bottles don’t require frequent cleaning—since they primarily store water—regular maintenance can ensure the longevity and performance of your bottle, especially for the electrolyser base. If you feel your bottle needs a refresh, here’s how to clean it properly.

Cleaning the Body and Lid

The body and lid of your hydrogen water bottle are the simplest parts to clean. You can clean these components as you would any standard water bottle, using your preferred method, whether that's hand-washing or using a dishwasher (if the material is dishwasher-safe). It’s always a good idea to use mild soap and warm water to maintain hygiene. Just remember to rinse thoroughly to avoid any soap residue.

Cleaning the Electrolyser Base

The electrolyser base is the part that requires more specific care. This is where the hydrogen is generated, and while the process is clean, mineral buildup or impurities from unfiltered water can accumulate over time. To ensure your electrolyser functions optimally, it’s important to follow a precise cleaning process.

Here’s the best way to clean your electrolyser base:

  1. Create a Cleaning Solution: Mix equal parts white vinegar and water (1:1 ratio). Vinegar is a natural and effective cleaning agent that helps break down any mineral deposits and impurities.

  2. Pour the Solution: Add the vinegar-water solution into your hydrogen water bottle, filling it as if you were about to run a hydrogen cycle.

  3. Run the Hydrogen Cycle: Set your bottle to the maximum cycle (10 minutes). This allows the cleaning solution to circulate through the system, helping to descale the electrolyser and remove any buildup.

  4. Rinse the Bottle: Once the cycle is complete, empty the bottle and rinse it thoroughly with cold or lukewarm tap water. This will help flush out any remaining vinegar or loosened debris.

  5. Run a Plain Water Cycle: To finish the cleaning process, fill the bottle with plain water and run another hydrogen cycle. This ensures any residual cleaning solution is completely removed, leaving your electrolyser clean and ready for use.
hydrogen water bottle cleaning ingredients

Prevention: Use Filtered Water

One way to reduce the need for frequent cleaning is by using filtered or purified water in your hydrogen water bottle. Tap water can contain minerals and impurities that may cause buildup over time, especially in the electrolyser base. By opting for filtered water, you’ll minimize the accumulation of these impurities and extend the life of your bottle’s internal components.

How Often Should You Clean your Hydrogen Water Bottle?

Because hydrogen water bottles mainly hold water, cleaning isn’t required after every use. However, if you’re using tap water or notice any signs of buildup—such as a change in the taste of the water or a slight residue inside the bottle—it’s a good idea to clean it. For general upkeep, performing this cleaning process once every 1-2 months should be sufficient, depending on how often you use the bottle and the type of water you use.

By following these simple cleaning steps, you’ll ensure your hydrogen water bottle continues to operate effectively and that the water remains fresh and clean with each use.

Final Thoughts on How to Clean your Hydrogen Water Bottle

Properly cleaning your hydrogen water bottle is crucial to maintaining its performance, ensuring the water you drink remains pure, and extending the life of your bottle. While the body and lid are easy to clean, the electrolyser base requires special care to prevent mineral buildup and impurities that could affect hydrogen production. By following a simple cleaning routine—such as using a vinegar-water solution and regularly descaling the electrolyser—you can keep your bottle running smoothly and enjoy the full benefits of hydrogen-infused water.

Incorporating cleaning ensures that your hydrogen water bottle continues to deliver fresh, hydrogen-rich water and supports your overall wellness for the long term. Remember, a well-maintained bottle not only performs better but also lasts longer, making it a worthwhile investment in your health.

Drink Healthy, Drink Evolved H2O.

Frequently Asked Questions on How to Clean your Hydrogen Water Bottle

How often should I clean my hydrogen water bottle?

You don't need to clean your hydrogen water bottle often since it primarily stores water. However, it's best to use common sense—if you notice any buildup or think certain parts, like the lid or body, need cleaning, go ahead and clean them. Regularly check the electrolyser base, and clean it when necessary to ensure optimal performance.

Can I use dish soap to clean my hydrogen water bottle?

Yes, mild dish soap is suitable for cleaning the lid and body of your bottle. Be sure to rinse thoroughly to remove any soap residue, as this will prevent flavour contamination. However, avoid using soap on the electrolyser base, as it could potentially damage the electrolysis mechanism.

Is it safe to clean the electrolysis mechanism in my hydrogen water bottle?

Only by following the instructions outlined in this blog post. The electrolyser base is delicate and can be easily damaged if handled improperly.

Can I use bleach to clean my hydrogen water bottle?

We discourage using bleach due to potential harm from residual traces. Opt for milder solutions like  white vinegar diluted in water. Always ensure a complete rinse after cleaning.

What should I do if my hydrogen water bottle develops an unusual smell or taste?

For unusual smells or tastes, clean your bottle with a warm water and vinegar solution. If the problem persists, replace worn parts or seek manufacturer advice. 

Disclaimer

The information provided in this blog is for educational and informational purposes only and is not intended as medical advice. Please consult with a healthcare professional before making any changes to your diet, lifestyle, or health regimen. Results from using hydrogen water may vary, and individual experiences may differ.

evolved h2o logo

    Back to blog
    Liquid error (sections/pagefly-section line 6): Could not find asset snippets/pf-be706d24.liquid